In a previous post I dealt with setting up an OpenVPN Community Edition server which is the free version of OpenVPN. I had initially hoped to use Authy for two-factor authentication in addition to LDAP but later found out that wasn’t going to work. So now I am looking at using DUO for two-factor authentication and OpenVPN Access Server.
Access Server is the “paid” version of OpenVPN and is significantly easier to install and configure vs. the open-source community edition. The two different products fulfill the same function and rely on the same technology to do so, but the underlying structure of Access Server is significantly different from the community edition.
Just to be clear, if you don’t need two-factor authentication, and don’t mind applying a bit of digital elbow grease, I highly recommend going with the community edition of OpenVPN as it is extremely scalable with no licensing fees. That being said, Access Server is decently economical, especially compared to putting in a hardware device like a Fortigate or Cyberroam UTM box.
This guide assumes you have an Ubuntu 13 box to work with, have full root access, know your way around the linux command-line, and have a basic understanding of networking concepts including VPN.
Let’s dive in!
Before you go any further, if you plan on using LDAP/Microsoft Active Directory, you need to make sure all of the proper ports are open between your Active Directory Domain Controller and your OpenVPN server. You can see which ports are needed for AD traffic here: What ports on the firewall should be open between Domain Controllers and Member Servers?